G0602 10" x 22" Benchtop Metal Lathe

An efficient benchtop machine with a powerful 1 HP motor, and all the features you need for accurate machining on every project!

The Grizzly G0602 Benchtop Metal Lathe is the perfect size for garage or workshop at 10" x 22". It features a 25mm spindle bore, 1-3/4"- 8 TPI MT#4 headstock and an 1-1/4" MT#3 tailstock.

The 1 HP motor powers the spindle through six speeds from 150-2400 RPM.

This lathe comes equipped with a full featured carriage and apron assemblies that provide super accurate cuts and finishes. This Benchtop Metal Lathe will cut only right-hand threads.

The G0602 includes other exceptional equipment you’ll need to get up and running including: the hardened and precision-ground V-ways, 5" 3-Jaw chuck with two sets of jaws, 6-1/2" 4-jaw chuck with reversible jaws, 8" faceplate and 4-way tool post.

The G0602 manual was written by our U.S.-based Documentation Department is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your lathe.

SPECIFICATIONS:

• Motor: 1 HP, 110V, single-phase, 13.6A
• Swing over bed: 9-1/2"
• Swing over cross slide: 6-1/8"
• Swing over saddle: 6-1/8"
• Distance between centers: 22"
• Bed width: 6-1/8"
• Spindle bore: 25mm
• Spindle speeds: 6, 150–2400 RPM
• Spindle type: Threaded, 1-3/4" x 8 TPI
• Spindle taper: MT#4
• Tailstock taper: MT#3
• Tailstock quill travel: 2-1/2"
• Cross slide travel: 6-1/2"
• Compound travel: 3-1/2"
• Maximum tool bit size: 1/2"
• Leadscrew: 3/4" x 12 TPI
• Longitudinal feeds: (9) 0.0025, 0.0140 in./rev.
• Inch thread range: (31) 8–72 TPI
• Metric thread range: (26) 0.25–3.50mm
• Footprint: 12-1/2" x 47-1/2"
• Overall dimensions: 46" W x 22" D x 16-5/8" H
• Approximate shipping weight: 432 lbs.

FEATURES:

• Hardened and ground V-ways
• Thread dial
• Spindle reversing switch
• Inch/metric dials
• Emergency stop button
• Quick-locking tailstock
• Enclosed oil-bath gearbox
• Chip tray and backsplash guard
• 1-year limited warranty

INCLUDES:

• 5" 3-Jaw scroll chuck with two sets of jaws
• 6-1/2" 4-Jaw independent chuck with reversible jaws
• 8" Faceplate
• 4-Way turret tool post
• MT#3 dead center
• MT#4 dead center
• Set of change gears
• Follow rest
• Steady rest
• Bottle for oil
• Tool box with service tools

Need help?

We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G0602 comes with a 1-year warranty.