G0765 7" x 14" Variable-Speed Benchtop Lathe

A small bench lathe with impressive torque for small parts production.

First and foremost, it features a special "Big Boy" tailstock which was designed with the same convenient quick-locking controls and extra-long footprint previously only found on our much larger lathes.

It also features variable-speed spindle controls with digital RPM display for dialing in the perfect cutting speed, a two-speed gearbox for the extra torque needed when turning at lower speeds and the ability to cut a wide range of inch and metric threads.

This lathe includes all the essential standard equipment you'll need to get up and running including: a 3-jaw chuck with internal and external jaws, 5" faceplate, steady rest, 4-way turret tool post and MT#2 and MT#3 dead centers.

Like all of the Grizzly lathes, the G0765 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects.

The G0765 manual was written by our U.S.-based Documentation Department is packed with useful information.

The Grizzly Technical Support team are also U.S.-based. Parts for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

Made in an ISO 9001 factory

SPECIFICATIONS:

• Swing over bed: 7"
• Swing over cross slide: 2-1/8"
• Distance between centers: 13-3/4"
• Spindle bore: 0.78" (20mm)
• Chuck bore: 0.645"
• Spindle nose taper: MT#3
• Motor: 3/4 HP, 110V, single-phase
• Number of speeds: Variable
• Range of low speeds: 100–1000 RPM
• Range of high speeds: 100–2000 RPM
• Leadscrew: 5/8"–16 TPI
• Compound rest travel: 2-3/4"
• Cross slide travel: 2-3/4"
• Carriage travel: 12-1/2"
• Maximum tool size: 5/16"
• Tailstock quill travel: 2"
• Tailstock barrel taper: MT#2
• Longitudinal feed speed: 0.04 IPR
• Number of inch threads: 18
• Range of inch threads: 12–52 TPI
• Number of metric threads: 10
• Range of metric threads: 0.4–2mm
• Footprint: 29-3/4" x 8-1/2"
• Overall dimensions: 30" W x 9" D x 10" H
• Approximate shipping weight: 110 lbs.

FEATURES:

• Variable low and high spindle speeds
• Spindle speed RPM display
• Cuts LH and RH threads
• 16-TPI reversible leadscrew
• Chip tray and backsplash guard
• Emergency stop
• Forward and reverse in all speeds
• Inch/metric dials
• Threading dial indicator
• Quick-locking tailstock

INCLUDES:

• 3" 3-Jaw chuck with internal & external jaws
• 5" Faceplate
• Steady rest
• 4-Way turret tool post
• Complete set of change gears
• MT#2 dead center
• MT#3 dead center
• Service wrenches
• Bottle for oil
• Extra fuse