G9645 Hardness Tester
Simple in design and easy to operate, yet sensitive and accurate.
The G9645 Hardness Tester was designed for measuring Rockwell Hardness values of metals and alloys of all kinds, hard or soft, whether flat, round or irregularly shaped.
Different indenters and loads can be selected and the hardness values can be measured over three Rockwell scales: A, B, and C.
Scale A is used to measure dense metallic materials carbides, hard alloys, and surface hardened parts.
Scale B is used to measure lower hardness materials such as non-ferrous metals and annealed steel.
Scale C is used to measure materials that have been quenched or tempered.
The tester is ideally suited for schools, laboratories, tool rooms and inspection departments.
The G9645 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.
The Grizzly Customer Service and Technical Support Teams are U.S. based.
Parts and accessories for the hardness tester is available online and shipped from the Grizzly parts warehouse in Springfield, MO.
Conforms to IS 3804-1966 and BS: 891-1962 part I and part II for Rockwell tests.
SPECIFICATIONS:
- Depth of throat: 5-1/4"
- Maximum depth of spindle below base: 2"
- Maximum load (KGF): 150
- Load range (KGF): 60, 100, 150
- Initial range load (KGF): 10
- Maximum test height: 4-1/4"
- Size of base: 7" x 18"
- Machine height: 24-1/2"
- Approximate net weight: 195 lbs.
INCLUDED:
- 5-3/4" testing table
- 2-3/16" testing table
- 120° diamond penetrator
- Rockwell A test block (1-pc.)
- Rockwell B test block (1-pc.)
- Rockwell C test blocks (3-pc.)
- Screwdrivers
- Dust proof plastic cover
Accessories
G9645 Hardness Tester
Simple in design and easy to operate, yet sensitive and accurate.
The G9645 Hardness Tester was designed for measuring Rockwell Hardness values of metals and alloys of all kinds, hard or soft, whether flat, round or irregularly shaped.
Different indenters and loads can be selected and the hardness values can be measured over three Rockwell scales: A, B, and C.
Scale A is used to measure dense metallic materials carbides, hard alloys, and surface hardened parts.
Scale B is used to measure lower hardness materials such as non-ferrous metals and annealed steel.
Scale C is used to measure materials that have been quenched or tempered.
The tester is ideally suited for schools, laboratories, tool rooms and inspection departments.
The G9645 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.
The Grizzly Customer Service and Technical Support Teams are U.S. based.
Parts and accessories for the hardness tester is available online and shipped from the Grizzly parts warehouse in Springfield, MO.
Conforms to IS 3804-1966 and BS: 891-1962 part I and part II for Rockwell tests.
SPECIFICATIONS:
- Depth of throat: 5-1/4"
- Maximum depth of spindle below base: 2"
- Maximum load (KGF): 150
- Load range (KGF): 60, 100, 150
- Initial range load (KGF): 10
- Maximum test height: 4-1/4"
- Size of base: 7" x 18"
- Machine height: 24-1/2"
- Approximate net weight: 195 lbs.
INCLUDED:
- 5-3/4" testing table
- 2-3/16" testing table
- 120° diamond penetrator
- Rockwell A test block (1-pc.)
- Rockwell B test block (1-pc.)
- Rockwell C test blocks (3-pc.)
- Screwdrivers
- Dust proof plastic cover
