SB1102 South Bend 26" 5 HP Drum Sander
Built for industrial-level production work.
Sand workpieces up to 4" thick by 26" wide all day long with the high-precision SB1102 26" 5 HP drum sander from South Bend.
With its dual-drum setup you can fit each sanding drum with a different grit, allowing both rough and finish sanding in one pass.
An external micro-adjustment knob for the outfeed drum provides the ultimate control for that final pass.
The table elevation is easily adjusted with a large handwheel and a four-leadscrew lifting system.
The variable-speed controlled industrial-duty rubber conveyor belt that is similar to those found on large wide belt sanders, feeds your work through the sanding head.
You can monitor the performance of the SB1102 with the amp/load meter conveniently located on the pedestal-mounted control panel.
The hook-and-loop sandpaper length needed is 3" wide by 176" long. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.
The SB1102 comes with a 2-year warranty and is built to South Bend high-precision industrial standards.
The SB1102 manual was written by our U.S- based Technical Documentation Department and is packed with useful information.
Made in an ISO 9001 factory
SPECIFICATIONS:
- Sanding drum motor: 5 HP, 220V, single-phase, 25A
- Conveyor motor: 1/3 HP
- Maximum board width: 26"
- Maximum board thickness: 3-3/4"
- Minimum board length: 9"
- Minimum board thickness: 1/8"
- Surface speed of drums: 2300 FPM
- Conveyor feed rate: Variable, 0–20 FPM
- Number of sanding drums: 2
- Drum diameter: 6"
- Sandpaper: 3" x 195", hook and loop
- Footprint: 23-1/2" D x 37" W
- Overall Dimensions: 50-1/2" W x 36-1/2" D x 50-1/2" H
- Approximate shipping weight: 639 lbs.
FEATURES:
- Variable-speed conveyor
- Industrial rubber conveyor belt (similar to those on wide belt sanders)
- Control panel with amp load meter
- Dual 6" aluminum drums
- Hinged hood for easy drum access
- External micro-adjustment on outfeed drum
- Four-leadscrew table elevation system
- Dual 4" dust ports
- US-based customer service and technical support
Hover to View 22" - 26" Models
Accessories
SB1102 South Bend 26" 5 HP Drum Sander
Built for industrial-level production work.
Sand workpieces up to 4" thick by 26" wide all day long with the high-precision SB1102 26" 5 HP drum sander from South Bend.
With its dual-drum setup you can fit each sanding drum with a different grit, allowing both rough and finish sanding in one pass.
An external micro-adjustment knob for the outfeed drum provides the ultimate control for that final pass.
The table elevation is easily adjusted with a large handwheel and a four-leadscrew lifting system.
The variable-speed controlled industrial-duty rubber conveyor belt that is similar to those found on large wide belt sanders, feeds your work through the sanding head.
You can monitor the performance of the SB1102 with the amp/load meter conveniently located on the pedestal-mounted control panel.
The hook-and-loop sandpaper length needed is 3" wide by 176" long. A wide selection of replacement sanding rolls, from coarse grits for fast material removal to ultra-fine grits for a flawless, high-grit finish.
The SB1102 comes with a 2-year warranty and is built to South Bend high-precision industrial standards.
The SB1102 manual was written by our U.S- based Technical Documentation Department and is packed with useful information.
Made in an ISO 9001 factory
SPECIFICATIONS:
- Sanding drum motor: 5 HP, 220V, single-phase, 25A
- Conveyor motor: 1/3 HP
- Maximum board width: 26"
- Maximum board thickness: 3-3/4"
- Minimum board length: 9"
- Minimum board thickness: 1/8"
- Surface speed of drums: 2300 FPM
- Conveyor feed rate: Variable, 0–20 FPM
- Number of sanding drums: 2
- Drum diameter: 6"
- Sandpaper: 3" x 195", hook and loop
- Footprint: 23-1/2" D x 37" W
- Overall Dimensions: 50-1/2" W x 36-1/2" D x 50-1/2" H
- Approximate shipping weight: 639 lbs.
FEATURES:
- Variable-speed conveyor
- Industrial rubber conveyor belt (similar to those on wide belt sanders)
- Control panel with amp load meter
- Dual 6" aluminum drums
- Hinged hood for easy drum access
- External micro-adjustment on outfeed drum
- Four-leadscrew table elevation system
- Dual 4" dust ports
- US-based customer service and technical support
