T33778 84-7/16" x 3/4" x .025" 3 TPI Carbide-Embedded Sawmill Blade
A replacement 84-1/16" carbide hook blade for the G0960 Sawmill.
These steel blades have carbide teeth which will cut faster and stay sharp the longest of all the blades available. The razor-sharp teeth have been precision-ground and the carbide tips are brazed into the pockets. The carbide tip is stronger and can resist more heat than non-carbide blades.
Hooked blades are most common for long cuts in thicker workpieces. The hooked tooth geometry is aggressive with the hook angled down towards the surface of the workpiece. This helps increase the feed rate through the material, but leaves tearout on the bottom of the workpiece.
Typically, there are more teeth per inch for narrower blades compared to wider blades. We mostly sell hook blades from 2 to 6 TPI versions. This 3 TPI cuts way faster than a 4 TPI or 6 TPI blade.
The flex back blade helps with absorbing the stresses of cutting. It is heat-treated at the teeth, leaving the back with more flexibility for movement through the material.
The Grizzly Customer Service and Technical Support teams are based in the U.S.A.
SPECIFICATIONS:
- Length: 84-1/2"
- Width: 3/4"
- Gauge: 0.025"
- TPI: 3 Hook
- Type: Carbide-embedded tool steel
FITS:
- Grizzly G0960 Sawmills
Accessories
T33778 84-7/16" x 3/4" x .025" 3 TPI Carbide-Embedded Sawmill Blade
A replacement 84-1/16" carbide hook blade for the G0960 Sawmill.
These steel blades have carbide teeth which will cut faster and stay sharp the longest of all the blades available. The razor-sharp teeth have been precision-ground and the carbide tips are brazed into the pockets. The carbide tip is stronger and can resist more heat than non-carbide blades.
Hooked blades are most common for long cuts in thicker workpieces. The hooked tooth geometry is aggressive with the hook angled down towards the surface of the workpiece. This helps increase the feed rate through the material, but leaves tearout on the bottom of the workpiece.
Typically, there are more teeth per inch for narrower blades compared to wider blades. We mostly sell hook blades from 2 to 6 TPI versions. This 3 TPI cuts way faster than a 4 TPI or 6 TPI blade.
The flex back blade helps with absorbing the stresses of cutting. It is heat-treated at the teeth, leaving the back with more flexibility for movement through the material.
The Grizzly Customer Service and Technical Support teams are based in the U.S.A.
SPECIFICATIONS:
- Length: 84-1/2"
- Width: 3/4"
- Gauge: 0.025"
- TPI: 3 Hook
- Type: Carbide-embedded tool steel
FITS:
- Grizzly G0960 Sawmills
