T34172 10-pack of 2" x 42" Ceramic Abrasive Belts–100-Grit
100-grit replacement sanding belts for your knife grinder.
Made with premium ceramic abrasive grains, the T34172 2" x 42" Sanding Belts tend to last longer than zirconia belts, especially under high pressure.
Because ceramic abrasive remove material slightly slower, they generate less heat during sanding, which can be beneficial for heat-sensitive materials or preventing workpiece burn.
100-grit paper is a moderately fine abrasive used for further refining surfaces after initial sanding. It helps smooth out imperfections and is suitable for light material removal. This grit level provides a good compromise between smoothing and maintaining a decent material removal rate.
It is important to sequence your sanding from a lower number to a higher number without bypassing more than one grit. Doing so may not remove the marks from the rougher grit.
The 2" x 42" size is ideal for use on knife grinders–especially on the Grizzly T32459 Knife-Making Grinder.
Within the belt thickness rating system, the Y-weight backing extremely heavy-duty cloth is used for aggressive sanding removal in heavy-duty applications.
Built to last, the added strength of this backing ensures that the belt stays in place and doesn't wear out too quickly, even with heavy use.
The combination of a robust backing and aggressive abrasive grains makes it suitable for removing material quickly and efficiently.
The Grizzly Customer Service and Technical Support Teams are U.S.-based.
Made in the USA
SPECIFICATIONS:
- Grit: 100
- Size: 2" x 42"
- Quantity: 10
- Paper weight: Y
- Abrasive grain: Ceramic
FITS:
- T32459 Knife-Making Belt Sander/Grinder.
Accessories
T34172 10-pack of 2" x 42" Ceramic Abrasive Belts–100-Grit
100-grit replacement sanding belts for your knife grinder.
Made with premium ceramic abrasive grains, the T34172 2" x 42" Sanding Belts tend to last longer than zirconia belts, especially under high pressure.
Because ceramic abrasive remove material slightly slower, they generate less heat during sanding, which can be beneficial for heat-sensitive materials or preventing workpiece burn.
100-grit paper is a moderately fine abrasive used for further refining surfaces after initial sanding. It helps smooth out imperfections and is suitable for light material removal. This grit level provides a good compromise between smoothing and maintaining a decent material removal rate.
It is important to sequence your sanding from a lower number to a higher number without bypassing more than one grit. Doing so may not remove the marks from the rougher grit.
The 2" x 42" size is ideal for use on knife grinders–especially on the Grizzly T32459 Knife-Making Grinder.
Within the belt thickness rating system, the Y-weight backing extremely heavy-duty cloth is used for aggressive sanding removal in heavy-duty applications.
Built to last, the added strength of this backing ensures that the belt stays in place and doesn't wear out too quickly, even with heavy use.
The combination of a robust backing and aggressive abrasive grains makes it suitable for removing material quickly and efficiently.
The Grizzly Customer Service and Technical Support Teams are U.S.-based.
Made in the USA
SPECIFICATIONS:
- Grit: 100
- Size: 2" x 42"
- Quantity: 10
- Paper weight: Y
- Abrasive grain: Ceramic
FITS:
- T32459 Knife-Making Belt Sander/Grinder.
